Technical items | Description |
Upstream PON interface | 1 EPON interface, SC single-mode/single-fibre, symmetric 1.25 Gbps
,1*WIFI,CATV |
Wavelength | Tx 1310nm, Rx 1490nm |
Optical output power | -1~+4dBm |
Receiving sensitivity | <-25dBm |
Farthest distance | 20km between OLT and ONU |
Optical interface | SC/UPC connector |
LAN4/3/2/1 port | RJ45Port connects to local internet,1 GE port and 3 FE port automatically |
Layer 2/3 switch | Support IEEE802.1Q VLAN |
| Support speed rate inhibition of broadcast packet at ONU |
| IEEE 802.3X flow control |
| Support 16 multicast addresses at each LAN port |
RF | CATV RF output port, connect a TV or set-top box via this
interface. |
CATV | CATV optical interface, support SC / APC optical pigtail connector
for CATV access networks PON + CATV three wavelength signals. |
Management maintenance | Centralized OLT management based on OAM WEB,CLI Upgrade software remotely Support to save configuration parameters when power down |
Indicators | indicators, for status of power supply, PON port and 1-4 Ethernet port. |
DC power supply | +12V, external AC-DC power adaptor |
Chipset | zte chipset |
Power consumption | ≤2.5W |
Operating condition | Operating temp: -5~+55℃
Operating humidity:10~90%(non-condensed) |
Storing condition | Storing temp: -30~+60℃
Storing humidity:10~90%(non-condensed) |
Dimension | 180mm*120mm*27mm(length*width*height) |
Net weight | 0.5Kg |
Feature:
l Plug and play, features auto-detecting, auto-configuration, and
auto firmware upgrade, etc.
l Completely compatible with EPON international standard
IEEE802.3ah/802.3-2005
l Support China Telecom EPON CTC3.1 standard and expand OAM
l Support triple churning encryption request
l Support DBA reporting mechanism request
l Support OAM (Link, Test, Loop back)maintenance function defined
IEEE802.3ah
l Support the remote upgrade and download
l Support status detection and fault report
l Support to save configured parameters if power down
l Support to configure the work mode at the user port
l Support MDI-MDIX automatic-detection at the user port.
l Support data encryption and decryption
l Support access authentication based on serial number
l Support access authentication based on MAC address
l Support 802.1Q VLAN
l Support rich QinQ VLAN functions and IGMP Snooping
l Support traffic rule to modify the related priority.
l Support IEEE802.11n 2T2R WiFi function
l Support to restore the factory settings
l Support the remote reset and reboot
l Support dying gasp outage alarm
l Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.
Other Specifications :
Standard | IEEE 802.11 b/g/n |
WiFi parameter | Frequency | 2.4~2.4835GHz |
Transmission speed | 2.4GHz Frequency: IEEE 802.11b :11/5.5/2/1M(Auto) IEEE 802.11g:54/48/36/24/18/12/9/6(Auto) IEEE 802.11n:270/243/216/162/108/81/54/27Mbps,up to 300Mbps |
Channel number | 2.4GHz :13 |
Spread-spectrum Technique | DSSS(Direct sequence spread spectrum) |
Data Modulation | DBPSK,DQPSK,CCK and OFDM(BPSK/QPSK/16-QAM/64-QAM) |
Sensitivity@PER (Package error rate) | 270M:-68dBm@10% PER;130M: -68dBm@10% PER; 108M:-68dBm@10% PER;54M:-68dBm@10% PER 11M:-85dBm@8% PER;6M:-88dBm@10% PER 1M:-90dBm@8% PER; |
Transmission distance | Indoor Maximum 120 meters;Outdoor Maximum 360 meters(The distance depends on the environment) |
RF power | 20dBm EIRP |
Antenna | 5dBi Antennas |
Physical Pic Reference :
Application
FAQ
1. Is there a minimum order quantity?
No, you can feel free to order any quantity of any product.
2. Do your products come with warranty?
Yes,we provide 1 year warranty for all our products from the date
of shipment.
3. How much charge voltage can reach?
Battery charging voltage should be 13.8V only high charging and low
cutoff 10V.
4. Is your switch customizable for rack or DIN rail mountable?
Yes, of course, but we have the MOQ. Please contact with out server
for details.
5. Does your network management switch support ring redundancy?
With STP (Spanning Tree) function, ring redundancy is supported.
The network management type we produce can support this function.
Our Company
Who is SHENZHEN OPTFOCUS TECHNOLOGY CO.,LTD ?
Shenzhen Optfocus Technology Co.,Ltd was established in 2009,
OPTFOCUS is a High -tech enterprise, professional R & D, production
and sales of Fiber to the Home (FTTH), Fiber to the Building (FTTB)
& FTTx, Fiber access network equipment and terminal equipment &
cabling system products. It is committed to provide Customized OEM
& ODM services to Global communication distributors, Telecom
Operators and System Integrators.
Our Service
Sales Team
OPTFOCUS TECHNOLOGY Service Online/Offline
A. Payment Terms
1) PAYPAL, Western Union, T/T for samples
2) ESCROW, Ali-Secure, L/C, OA are negotiable
3) Drop-shipping available; Agent/Proxy are welcome!
B. Any inquiried will be replied within 24 hours
C. Professional manufacturer; Welcome to visit our website
D. OEM/ODM service available
E. High quality, reasonable/competitive price, fast lead time
F. After-sale Service
